Machinery Masters Inc. - Kuraki kbt-11w.A - Stoney Creek, Ontario | Machinery Masters Inc.

Technical Data

TRAVEL

X-axis Travel - 2000 mm (78.74")

Y-axis Travel - 1500 mm (59.06")

Z-axis Travel - 1450 mm (57.09")

W-axis Travel - 500 mm (19.69")

Table Top to Spindle Center - 0 mm ~ 1500 mm (0" ~ 59.06")

Table Center to Spindle Nose - 550 mm ~ 2000 mm (21.65" ~ 78.74")

WORK TABLE

Table Work Space - 1400 mm x 1600 mm (55.12" x 62.99")

Table Maximum Loading Capacity - 6,500 kg (14,300 lbs)

Table Top Profile - 22 mm (0.87") 7T slots

Table Automatic Indexing - 0.001 degrees (every 90 degree index by locate pin)

SPINDLE HEAD

Boring Spindle Diameter - 110 mm (4.33")

Spindle speed (for every 1min^-1) - 5 min^-1 ~ 3000 min^-1

Spindle Speed Change Range - 2 Step

Spindle Taper - BBT50 (BIG-PLUS Dual contact spindle system

Spindle Speed Change Range - 3 Step

FEED

Rapid Traverse (X / Y / Z) - 12 m/min (472.44 inch/min)

Rapid Traverse (W) - 10 m/min (393.70 inch/min)

Feed Rate - 1 mm ~ 6000 mm (0.04" ~ 236.22")

Table Revolution - 2 min^-1

AUTOMATIC TOOL CHANGER

Tool Shank - MAS BT50 (BBT50 BIG-PLUS Dual contact spindle system)

Pull Stud - MAS P50T-1 (45 degrees)

Tool Storage Capacity - 40

Maximum Tool Diameter [vacant adjacent tool pots] - 125 mm [240 mm], 4.92" [9.45"]

Maximum Tool Length - 400 mm (15.75")

Maximum Tool Weight - 25 kg (55 lbs)

Tool Selection - At Random

MOTORS

Spindle Motor - AC18.5 kW (25 HP) (30 min) / 15 kW (20 HP) (cont.)

Feed Motor - X & Y: 4.2 kW (5.6 HP) / Z: 9.0 kW (12.0 HP) / W: 3.0 kW (4.0 HP) / B: 4.0 kW (5.4 HP)

Hydraulic Motor - 2.8 kW (3.7 HP)

VOLTAGE

Power Capacity (Not including options) - 52 kVA

Air Pressure Source - 0.5 MPa

Air Pressure Source Flow (Not including options) - 400 NL/min (atm)

DIMENSIONS

Machine Height - 3950 mm (155.51")

Floor Space (Not including options) - 5250 mm x 6055 mm (206.69" x 238.39")

Machine Weight (Including NC Unit) - 26,000 kg (57,200 lbs)