KIWA KH-4100kai
kiwa KH-4100kai
KIWA KH-4100kai is a high-performance horizontal machining center with full rotary B-axis can be installed in a space for a vertical machining center. The KH-4100kai is designed as slim as possible.
Compared to KIWA HMC model KH-4500kai, the KH-4100kai saves floor space by 45%. In spite of the compact design, the KH-4100 is equipped with full specs for a variety of workpieces and factory automation equipment. The KH-4100kai is equipped with a wide center trough in the machining area and a strong bed coolant wash. Chips will go directly down the center trough for disposal at the rear of the machine. Sheet metal covers on both sides are steeply slanted to guide chips to the trough.
Features And Benefits
- (4) Simultaneously Controlled Axes
- Provision for Coolant Through Spindle
- Coolant Chip flow System
- Spindle Oil Cooler
- Pallet and Chip Wash
- Chip Conveyor – LNS-Turbo MH500
- Tool Life Management
- AICC2 400 block look ahead
- 1280 Meter / 512 kB Memory
- Helical Interpolation
- 200 Tool Off Sets
- Macro Programming
Technical Data
TRAVEL
- X axis Travel - 20.1" (510 mm)
- Y axis Travel - 20.1" (510 mm)
- Z axis Travel - 20.1" (510 mm)
- 4th axis Travel (Rotary Table) - 0 to 360 degrees
PALLET
- Pallet Surface to Spindle Center - 2APC: 2.0" - 22.0" (50 mm - 560 mm) (single pallet: 6.9" - 27.0" (175 mm - 685 mm))
- Pallet Center to Spindle Nose - 3.9" - 24" (100 mm - 610 mm)
- Pallet Size - 15.7" x 15.7" (400 mm x 400 mm)
- Pallet Load Capacity - 1100 lbs (500 kg)
- Maximum Work Piece Size - 21.7" x 33.5" (550 mm - 850 mm)
- Pallet Change Time - 12.5 seconds
FEEDRATE
- X axis Rapid Traverse - 3149 in/min (80 m/min)
- Y axis Rapid Traverse - 3149 in/min (80 m/min)
- Z axis Rapid Traverse - 3149 in/min (80 m/min)
- 4th axis - 37 rpm
- Cutting Feed (X/Y/Z) - 1181 in/min (30 m/min)
SPINDLE
- Spindle Power - 20(15) HP
- Spindle Speed - 15,000 rpm
- Spindle Taper - CAT40
TOOLS
- Standard Number of Tools - 60
- Maximum Tool Weight - 17.8 lbs (8 kg)
- Maximum Tool Length - 15.7" (400 mm)
- Maximum Tool Diameter - 3.3"/3.5" (85 mm/140 mm)
- Tool Changing Time (Tool to Tool) - 0.9 Seconds
GENERAL
- Machine Weight - 2 APC + 60 ATC: 16940lbs (7700 kg)
- Machine Control - FANUC 0i-MF
- Coolant Tank Capacity - 79.3 gal (300 L)
KIWA KH4100
CLICK BELOW TO FIND OUT MORE!
MORE FROM KIWA
KIWA KH-4500kai
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
This website uses cookies.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.