Signed in as:
filler@godaddy.com
KIWA KH-4500kai
kiwa KH-4500kai
Making full use of KIWA’s experience, KIWA has eliminated all possible wasted space on the KH-4500kai. As a result the KIWA KH-4500kai incorporates one of the largest work envelopes in its class.
KIWA has also maintained its speed and agility with over 1G acceleration/deceleration on all axes. The rigidity has been greatly enhanced with the “stepped” base and column casting design. Keeping the traditions of KIWA design, the KH-4500kai is fully expandable both for the APC and ATC portions of the machine. These features are field installable.
Features And Benefits
- (4) Simultaneously Controlled Axes
- Provision for Coolant through Spindle
- Spindle Oil Cooler
- Ballscrew Cooling
- Y-axis Cooling System
- Box Type Bed
- Stepped Layout of X-axis Guide Ways
- Roller Type Guide Way
- Pallet and Chip Wash
- Chip Conveyor – LNS-Turbo MH500
- Spiral Augers
- Tool life Management
- AICC1
- 1280 meter / 512 kB Memory
- Helical Interpolation
- Macro Programming
Technical Data
TRAVEL
- X axis Travel - 27.6" (700 mm)
- Y axis Travel - 29.1" (740 mm)
- Z axis Travel - 26.8" (680 mm)
- 4th axis Travel (Rotary Table) - 0 to 360 degrees
PALLET
- Pallet Surface to Spindle Center - 2.0" - 26.0" (50 mm - 660 mm)
- Pallet Center to Spindle Nose - 3.9" - 30.7" (100 mm - 780 mm)
- Pallet Size - 15.7" x 15.7" (400 mm x 400 mm)
- Pallet Load Capacity - 1100 lbs (500 kg)
- Maximum Work Piece Size - ø 29.5" (750 mm) for 2/6APC / ø 25.6" (650 mm) for 8APC
- Pallet Change Time - 7.6 seconds
FEEDRATE
- X axis Rapid Traverse - 3149 in/min (80 m/min)
- Y axis Rapid Traverse - 3149 in/min (80 m/min)
- Z axis Rapid Traverse - 3149 in/min (80 m/min)
- 4th axis - 66 rpm
- Cutting Feed (X/Y/Z) - 1181 in/min (30 m/min)
SPINDLE
- Spindle Power - 50(37.5) HP
- Spindle Speed - 15,000 rpm (12,000 rpm or a 20,000 rpm built-in)
- Spindle Taper - CAT40
TOOLS
- Standard Number of Tools - 60 (40/80/120/240) std (opt)
- Maximum Tool Weight - 17.6 lbs (8 kg)
- Maximum Tool Length - 15.7" (400 mm)
- Maximum Tool Diameter - ø 2.8/5.5 for 40/60ATC 3.7/7.2inch for 80/120/220ATC (adjacent pots full/empty) in (mm)
- Tool Changing Time (Tool to Tool) - 0.9 (1.7: heavy tool programmable) / 2.8 (3.6: heavy tool programmable) seconds
GENERAL
- Machine Weight - 2APC+60ATC: 20240 lbs (9200 kg) / 2APC+120ATC: 21890 lbs (9950 kg)
- Machine Control - FANUC 31-iB
- Coolant Tank Capacity - 145.3 gal (550 L)
KIWA KH-4500kai
CLICK BELOW TO FIND OUT MORE!
MORE FROM KIWA
KIWA KH-4100kai
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
KIWA TRIPLE H40 3-AXIS
This website uses cookies.
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.